What Are the Different Ways to Unclog the Toilet?
Once in a whole, every homeowner faces the inconvenience caused due to the clogged toilet. The first thing that comes to your mind when you have any trouble with the flow of the toilet is the plunger. Is it the only way to unclog the toilet? Not at all. Apart from taking the help of the plumber Scoresby, there are various ways that could ease the clogged toilet.
Here is what the Blocked Drains Melbourne has to say for unclogging the toilet.
· Plunger
The most used and effective method to unclog the toilet is using the plunger. The effectiveness of the plunger depends on the size of the toilet drain mouth and the diameter of the plunger that you are choosing. If the plunger that you have bought does not fit properly, it may not be that effective. So, make sure that you choose the right size plunger.
· Hot Water and Dish Wash Soap
Put one gallon of water on the stove to head when the water heating adds the dish wash soap to the water. Let it heat properly but make sure that you do not bring it to boil. As it has heated, pour that solution into the toilet. The water is very hot, so make sure that you take care while pouring it into the toilet.
Leave it for around 15 minutes. The hot water and the soap would soften the clog and allow it to drain properly. Soon the water would start flowing through the toilet without any problem.
· Using Plumbing Snake
It is one of the handy tools that a homeowner has, just like the plunger. The use of the toilet snake is easy. All you need to do is put the head of the toilet snake in the toilet bowl. Move the handle clockwise to let the head move further to where the clog is present. When you feel the clog, you have to wind the snake to loosen it. After you can wind it, flush the toilet to check if it is working properly. If not, repeat the process until you get rid of the clog properly.
· Wire Cloth Hanger at Your Rescue
Yes, you can use the cloth hanger to get rid of the toilet clog. With utmost care, open the hanger wire and straighten it. The end of the wire may be sharp, which could damage the toilet surface, so cover it with some cloth and seal it with duct tape to keep the cloth in place. Insert the wire in the toilet drain until you feel the obstruction.
Once you feel it, touch the wire against the obstruction to get rid of the clog. You can also move the wire in a circular motion to clear the clog. Do it until the water flows properly.
· Take The Help of The Plumber
If you do not want to attempt any of this or you do not have time, all you need to do is book an emergency appointment for Blocked Drains Melbourne at the reliable plumbing service provider, and they will take care of the rest.
Comments
Post a Comment